Model 78:

• 2 basic styles include Standard or Submersible models Submersible models are specially coated in a non-corrosive material for additional protection.

• Foot or Rear mounting styles

• The Keyed rod is to maintain character orientation, and the non-keyed rod allows the characters to rotate and is a smaller unit

• 4 Different rod styles to hold the stamps offer multi-character square “A” pockets, and single character round “B” pockets, in addition to “O”

style set screw retention, and “G” style pin/o-ring retention. The “G” style rod is recommended for systems susceptible to vibrations

• 2 different cylinder approach strokes: 1” and 2”

• Integrated position sensors offer the added benefit to integrators

• Standard system requires lubricated air. The NL non-lube version is required for “dry” air.

• Recommended Air Hose: ¼” I.D. Minimum

• Recommended Air Valve: CMT TP valve or ¼” 4-way

• Operating pressure: 20-80psi

• Max. Marking Pressure: 1500lbs (at 80psi) for 1”stroke and 2200 lbs (at 80psi) for 2” stroke

• Stamp Capacities Rod Style “B (1) Pc. CM7X Stamp Insert. CM7X inserts can mark up to a 3/16” character.

• Stamp Capacities Rod Style “A”

   (4) Pc’s 1/16” Char. CMF06 Stamp Inserts

   (2) Pc’s 1/8” Char. CMF13 Stamp Inserts

• Stamp Capacities Rod Style “GB”

   (1) Pc. CM7G Stamp Insert. CM7G inserts can mark up to a 3/16” character. 

• Stamp Capacities Rod Style “GA”

   (4) Pc’s 1/16” Char. CMV06 Stamp Inserts

   (2) Pc’s 1/8” Char. CMV13 Stamp Insert