Model 75S and 85S

• Two basic styles of this air hammer look identical. The internal difference offers two power ranges. The maximum marking pressure for the model 75S is 1500 at 80 psi, and the maximum marking pressure of the model 85S is 2500 at 80 psi.

• Four bolt holes are located at the back of the marker for easy installation. (4) 5/16” tap x .62 deep equally spaced on a 1.562” B.C.

• 3 Standard rod styles to hold the stamps offer multicharacter OA or OAS38, and single character OB

• Each system offers a choice of air port connections. One is located on the back of the cylinder and one is located on the side of the cylinder. With these ¼ NPT connections CMT recommends the use of 3/8” airline. Use of a filter and lubricator is also recommended.

• Recommended Air Hose: 3/8” I.D. minimum

• Operating Pressure: 20 to 100psi

• Max. Marking Pressure: Model 75S is 1500lbs (at 80psi), Model 85S is 2500lbs (at 80 psi)

• Stamp Capacities Rod Style “B” 

  (1) Pc CM8X round insert 1/16” t0 1/4” character. Multi-character insert available for smaller character sizes.

• Stamp Capacities Rod Style “A”

  (4) Pc’s 1/16 Char. CMG06 Stamp Inserts

  (2) Pc’s 1/8 Char. CMG13 Stamp Inserts Stamp Capacities 

• Rod Style “AS38”

  (6) Pc’s 1/16 Char. CMG06 Stamp Inserts

  (3) Pc’s 1/8 Char. CMG13 Stamp Inserts